This low cost modules were designed for Point to Point or many Points to Many Points Linking of Your Radio Systems which lets you Send Radio Audio both ways over the Internet and gives you Push-to-Talk (PTT) in both directions. This module uses your Computer Sound Card and your RS232 interface.You must have a Computer connected to the Internet to make this model work. This unit has Voice Operated Squech (VOX) feature using the software and Carrier Operated squelch (COS/COR) Features. This Model will operate your Repeater, Base Station, Mobile. or Portable Radios over the Internet. If you have been using Leased Lines this will save you a lot of money as long as you have Your Internet running. The Model RoIP-B6 Works Great with any Radios connecting to the 16-pin or 20 pin connector on the Back of most Motorola Radios like the Maxtrac ,CM200,CM300, or CDM1550 Series Radios. You can build a cable or Order one from us for $95.00 Ready to go. We supply audio cables and a RS232 cable with the Modules to connect the RoIP=B3 Model to Your Computer for PTT. We now also supply a USB to RS232C Interface cable if you want to use USB to connect to our products. This Model has a Computer operated Relay (COR) feature that the B1 or Portable Radio model does not have. The COR feature is used to send a PTT type signal to the internet when you talk to your Base Station unit using your Local Radio system. If you have a Maxtrac or GM300 type Motorola that has a 5 pin connector on the back you can use the Microphone connector on the front of the radio with a simple cable with RJ45 connectors on both ends. If you want to have us modify your radio we can add COR to the Front Microphone connector. You can also Setup a RoIP B6 Radio System using a Portable Radio or any Two-way Portable that has a Speaker and Microphone Jack or a Remote Connector with access to the Audio and PTT circuits of the radio. Radios that come with Remote Microphone features will do the job. Comes with 2 audio cables and a RS232 Serial cable to connect to your computer to the B6 unit. We can supply Commercial grade SiteCAST Software that will is the lowest cost and very easy to setup that will get you going for $145.00 per connection. You will need to build or Purchase from us a cable to connect your radio to the RoIP-Modules. Talk to us about building one for your radio.Send Email or Call if you are have questions. Phone 561-703-0696 Ask for Bob HicksRadio Interface cables cost from $95.00 to $150.00 call for quote. Two-Way RoIP-B6 RJ45 interface connectors to your radio.Shows the connections needed to connect the RoIP-B6 Module to your Radio.
Carrier Operated Squelch (COS/COR) sends PTT signals to Internet.
No Connection
RX Speaker ground Return OR Hook Sw for Enable or Disable Radios RX PL
Ground.
Audio from Internet to Radio Transmitter.
PTT for keying Radio
No Connection
Audio from Radio Receiver to going to the Internet.
Comments
bocabob
Sat, 12/03/2011 - 17:36
Permalink
More Information for the TPC RoIP B6 Module
This low cost modules were designed for Point to Point or many Points to Many Points Linking of Your Radio Systems which lets you Send Radio Audio both ways over the Internet and gives you Push-to-Talk (PTT) in both directions. This module uses your Computer Sound Card and your RS232 interface.You must have a Computer connected to the Internet to make this model work. This unit has Voice Operated Squech (VOX) feature using the software and Carrier Operated squelch (COS/COR) Features. This Model will operate your Repeater, Base Station, Mobile. or Portable Radios over the Internet. If you have been using Leased Lines this will save you a lot of money as long as you have Your Internet running. The Model RoIP-B6 Works Great with any Radios connecting to the 16-pin or 20 pin connector on the Back of most Motorola Radios like the Maxtrac ,CM200,CM300, or CDM1550 Series Radios. You can build a cable or Order one from us for $95.00 Ready to go. We supply audio cables and a RS232 cable with the Modules to connect the RoIP=B3 Model to Your Computer for PTT. We now also supply a USB to RS232C Interface cable if you want to use USB to connect to our products. This Model has a Computer operated Relay (COR) feature that the B1 or Portable Radio model does not have. The COR feature is used to send a PTT type signal to the internet when you talk to your Base Station unit using your Local Radio system. If you have a Maxtrac or GM300 type Motorola that has a 5 pin connector on the back you can use the Microphone connector on the front of the radio with a simple cable with RJ45 connectors on both ends. If you want to have us modify your radio we can add COR to the Front Microphone connector. You can also Setup a RoIP B6 Radio System using a Portable Radio or any Two-way Portable that has a Speaker and Microphone Jack or a Remote Connector with access to the Audio and PTT circuits of the radio. Radios that come with Remote Microphone features will do the job. Comes with 2 audio cables and a RS232 Serial cable to connect to your computer to the B6 unit. We can supply Commercial grade SiteCAST Software that will is the lowest cost and very easy to setup that will get you going for $145.00 per connection. You will need to build or Purchase from us a cable to connect your radio to the RoIP-Modules. Talk to us about building one for your radio.Send Email or Call if you are have questions. Phone 561-703-0696 Ask for Bob HicksRadio Interface cables cost from $95.00 to $150.00 call for quote. Two-Way RoIP-B6 RJ45 interface connectors to your radio.Shows the connections needed to connect the RoIP-B6 Module to your Radio.
bocabob
Sun, 01/01/2012 - 16:18
Permalink
TPC B6 Line interface
This is a great Product and works very well.